top of page

Higher Performance

Tuningworx Motorsport

Tuningworx have been developing motorsport vehicles for many years and in that time have produced a number of race winning Subaru and BMW tarmac & gravel rally cars along with circuit focused cars.
At present, in conjunction with main sponsor Lithiumax, Tuningworx are developing an extremely focused and competitive BMW E92 M3 to compete in the 2023/24 Australian Targa Championship.
Starting life as a 2008 model BMW E92 M3 with the blistering S65 4.0L V8 powerplant developing 330kw and revving to an impressive 8600rpm with dual clutch DCT 7 speed Getrag gearbox and LSD differential.
Running the full Tuningworx RACE+ Titanium exhaust system, weighing a total of 15kg versus over 45kg for the OEM exhaust system as well as the Tuningworx front braking system consisting of Tuningworx fully floating aluminium hats, AP rotors and AP 5000R calipers for a total of 11.9kg, Tuningworx titanium wheel studs and nuts at 260g for a set of front and rears versus 1.22kg for OEM. A Lithiumax Carbon Series RACE10+ Bluetooth unit with OEM mounting kit for a total of 4.6kg is also fitted compared to 22kg for the OEM AGM battery.
We have also built and run the 2005 JDM Lithiumax STI with the following modifications:
Tuningworx have added its patented Weapons-Grade Motorsport Downpipe, available for $799 in stainless steel or $899 ceramic coated in white HPC material, images can be found on this page. The Weapons-Grade motorsport pipe out performs any other down-pipe design with lifts of 10kw over older bellmouth designs.
To order Click Here.
To hear the racing 2004 JDM STI in action with its Weapons-Grade down-pipe, follow theYouTube video link to the Targa Tasmania video below.

​Ceramic coated headers, turbine housing and Weapons Grade downpipe.
2.5 inch stainless exhaust into 2.5 inch titanium muffler.
Spec C VF36 Turbocharger
850cc Injectors.
Aeromotive 340lph fuel pump with Spec C anti-surge system.
Lightweight pulleys and flywheel.
Cosworth Engineering anti-surge sump baffle.
Cosworth Engineering panel air filter.
Lightweight aluminium hat front and rear brake rotors with matching pads.
SG Motorsports Air-Oil-Separator AOS.
Braided stainless brake and clutch line.
10 point roll cage.
Sparco seats on sparco aluminium brackets
OMP Hans 6 point harnesses
Ohlins Flag coilover suspension
Perrin 22mm sway bars and solid end-links
Anti lift kit
Coralba trip computor
Peltor intercom system
Lithiumax battery - custom battery box
Personal custom leather steering wheel
Sparco navigator footrest
Tuningworx brake cooling ducts
Carbon fibre prop shaft
Spec C rear diff
Lightweight flow form wheels with Yokohama A050 tyres
Group N bushes and gearbox mount
Aluminium fastners
bottom of page